Ikegami Electronics HEM-1770WR, Operation Manual, Page: 44 / 88

- - 34
࣭
MODE5 (1357-2468)
࣭
MODE6 (1234-5678)
MODE7 (1357-8642)
MODE8 (12-34)
㸸
During the display mode 1-2ch
and 1-4ch settings.
MODE8 (1234-5678)
㸸
During the display mode
1-8ch settings.
* The display of MODE 4 varies depending on
the number of channels for the section
յ
.
࣭
Default setting is 1(1357-2468).
ն Setting the channel display of audio level meter
࣭
Set the display channel of the audio level meter.
࣭
CH 1
㸫
2
㸸
CH1 to CH2 is displayed.
࣭
CH 1
㸫
4
㸸
CH1 to CH4 is displayed.
࣭
CH 1
㸫
8
㸸
CH1 to CH8 is displayed.
࣭
Default setting is CH 1-8.
շ Setting the brightness of audio level meter
࣭
Set the brightness of the audio level meter.
࣭
The level meter image transmissive mode or
nontransmissive mode can be set.
࣭
LOW
࣭
MID
࣭
HIGH
࣭
LOW (MIX) (Image transmissive mode)
࣭
MID (MIX) (Image transmissive mode)
࣭
HIGH (MIX) (Image transmissive mode)
࣭
Default setting is MID.
ո
Setting the peak hold display of audio level
meter
࣭
Used to turn on and off the peak hold display.
࣭
Default setting is ON.
չ
Setting the reference level
࣭
Set the reference level of the audio level meter.
࣭
-18dBFS
࣭
-20dBFS
࣭
Default setting is -20dBFS
պ
Downmix setting
࣭
Set the 5.1 channel surround downmix.
࣭
Mix the 5.1 channel surround audio signal as-
signed to 6 channels of embedded audio into 2
channels and outputs from the speaker, the
headphone and the audio monitor output.
࣭
5.1ch surround super woofer(LFE) channel is not
mixed.
ջ Setting the downmix formats
࣭
Select the mixing method to downmix 5.1ch audio
in “ISO/IEC” and “ARIB”.
࣭
Default setting is ISO/IEC
ռ
Setting the Ls/Rs level
࣭
Set the coefficient of Ls/Rs to mix.
࣭
Set among -3dB/-6dB/-9dB/OFF.
(OFF
㸻 㸫҄
)
࣭
Default setting is
㸫
3dB
ս Setting the embedded audio channel assign-
ment of speaker (Lm)
࣭
Set the channel of embedded audio, which the
audio for 5.1ch surround Lm speaker (left side in
front) should be assigned from.
࣭
Default setting is CH1
վ
Setting the embedded audio channel assign-
ment of speaker (Rm)
࣭
Set the channel of embedded audio, which the
audio for 5.1ch surround Rm speaker (right side
in front) should be assigned from.
࣭
Default setting is CH2
տ
Setting the embedded audio channel assign-
ment of speaker (C)
࣭
Set the channel of embedded audio, which the
audio for 5.1ch surround C speaker (center)
should be assigned from.
࣭
Default setting is CH3
ր Setting the embedded audio channel assign-
ment of speaker (Ls)
࣭
Set the channel of embedded audio, which the
audio for 5.1ch surround Ls speaker (left side in
rear) should be assigned from.
࣭
Default setting is CH5
㻯㻴㻌㻝
㻯㻴㻌㻟
㻯㻴㻌㻡
㻯㻴㻌㻣㻌 㻯㻴㻌㻞
㻯㻴㻌㻠
㻯㻴㻌㻢
㻯㻴㻌㻤㻌
㻹㻻㻰㻱㻌㻡
㻯㻴㻌㻝㻘㻞㻘㻟㻘㻠 㻯㻴㻌㻡㻘㻢㻘㻣㻘㻤
㻯㻴㻌㻝㻘㻟㻘㻡㻘㻣
㻯㻴㻌㻤㻘㻢㻘㻠㻘㻞
㻹㻻㻰㻱㻌㻢
㻹㻻㻰㻱㻌㻣
㻯㻴㻌㻝㻘㻞 㻹㻻㻰㻱㻌㻤㻌㻔㻠㼏㼔㻕 㻯㻴㻌㻟㻘㻠
㻹㻻㻰㻱㻌㻤㻌㻔㻤㼏㼔㻕
㻯㻴㻌㻝㻘㻞㻘㻟㻘㻠
㻯㻴㻌㻡㻘㻢㻘㻣㻘㻤
㻹㻻㻰㻱㻌㻢䚸㻣䚸㻤