Ikegami Electronics HEM-1770WR, Operation Manual, Page: 55 / 88

- - 45
շ
Settig the CM-70 system
࣭
The settings of optional YPbPr/RGB analog com-
ponent modules are set here.
࣭
The display is active only when this module is
mounted.
ո
Switching between analog PC and COMPO-
NENT input signals (Settings only for the
CM-70)
࣭
PC
ȇ
Analog PC input of the CM-70 is selected.
࣭
VIDEO
ȇ
COMPONENT input of the CM-70 is
selected.
࣭
This function can be assigned with the F1 to F4
switchon the front panel.
࣭
Default setting is VIDEO.
չ !
Setting the display mode with analog PC input
(Settings only for the CM-70)
࣭
Used to preset the image display size. The table
!
below Item
ձ
is also applicable with the display
!
pixel size with respect to the input signal mode.
࣭
REAL
ȇ
Images are displayed with the resolution
of input signal.
࣭
NORMAL
ȇ
With the aspect ratio intact, images
are enlarged or reduced in this
panel’s maximum displayable size.
࣭
FULL
ȇ
Images are fully displayed onscreen
!
(1920 x 1080).
࣭
Default setting is NORMAL.
պ !
Selecting the analog PC input XGA/WXGA
(Settings only for the CM-70)
࣭
When the analog PC input signal is WXGA, the-
format may fail to be identified, depending on the
signal timing. In such case, select WXGA.
࣭
Default setting is XGA.
ջ ! Executing the automatic adjustment of PC input
(Only for the DVI(PC) and CM-70)
࣭
Used to automatically adjust the phase, clock and
horizontal/vertical onscreen position in Items
ռ !
thru
տ
.
࣭
With the
Ȩ
EXECUTE
ȩ!
characters blinking, press
the ENT switch, and the automatic adjustment
will be made.
࣭
During the automatic adjustment, do not turn off
the power and switch the input signal.
ռ !
Adjusting the horizontal onscreen position with
PC input (Only for the DVI(PC) and CM-70)
࣭
Used to adjust the horizontal onscreen position.
ս ! Adjusting the vertical onscreen position with
PC input (Only for the DVI(PC) and CM-70)
࣭
Used to adjust the vertical onscreen position.
վ !
Adjusting the clock with analog PC input
(Settings only for the CM-70)
࣭
Used to adjust if noticeable vertical stripes appear
onscreen.
տ ! Adjusting the phase with analog PC input
(Settings only for the CM-70)
࣭
Used to adjust if horizontal stripes appear or the
characters look blurry onscreen.
㻌
㻌