Ikegami Electronics HEM-1770WR, Operation Manual, Page: 13 / 88

- 3 -
(17) Downmix function
Among the embedded audio 8 channels, 5.1
channel surround audio channel (Lm, Rm, C, Ls,
and Rs) has been selected for the stereophonic
audio function at the downmix mixing ratio
specified by ARIB and ISO/IEC.
You can output the downmixed audio to the
speaker that is built in the monitor, headphone,
and analog output.
(18) Auto Setup Function for Color Temperature
The color temperature, which was difficult to
adjust before is simply and automatically ad-
justable in each steps without PC, connecting this
ASP-100 Auto Setup Prove to the USB port on
monitors.
And it is also able to be used as the measuring
instrument for measuring color temperature
(color point of x, y) and contrast.
(19) 2x/4x zoom function
This function enlarges the input signal 2x and
4x without scaling, and allows you to check the
scratch on the CCD of camera and fine details of
the image.
(20) Image & TEST signal MIX function
While the image is displayed, "pluge signal of
-2%/0%/+2%"can be displayed at the same time on
the corner of the screen (small enough not to dis-
turb the image) so that you can check if there is
no "black sun" effect caused by the brightness
adjustment while looking at the image.
The "brightness signal of 100 to 109%" is also
displayed at the same time so that you can check
if the signal of 100% to 109% is not saturated
when it is input during the contrast adjustment.
(21) White balance adjustment assist function
When adjusting white balance, each switch on
the front can be assigned to the direct switch for
the white balance adjustment, which allows you
to adjust the white balance quickly and easily.
When you remote control the white balance
adjustment using a USB mouse, various adjust-
ment buttons (BRIGHTNESS, CONTRAST,
R/G/B BACKGROUND, R/G/B GAIN) are dis-
played on the screen with GUI. The white balance
can be adjusted with ease as if you have an op-
eration panel at hand.
(22) Interlaced display
In order to achieve a CRT-like display, it does
not perform image transformation such as I/P
transformation and scaling process for the 1080i
interlaced signal; however, by artificially dis-
playing black lines between lines on the field like
a CRT interlaced scanning, the CRT-like inter-
laced display can be achieved.
(23) CRT gamma and raster correction
It has a CRT gamma mode that is similar to the
Ikegami CRT master monitor. By setting to this
mode, you can operate it as the same manner as a
conventional CRT master monitor.
Since the raster brightness of CRT monitor can
slightly vary depending on the CRT types and
color temperature adjustments, the raster
brightness of CRT gamma can be arbitrary cor-
rected according to the raster brightness of the
currently used master monitor. Not only the
gamma but also black can be set similar to the
CRT.