Ikegami Electronics HEM-1770WR, Operation Manual, Page: 65 / 88

- 55 -
4-17
㸬
Description of MENU 14 Functions
㻌
㻌
ձ Displaying the MPU version
࣭
Displays the current software version.
ղ
Displaying the FPGA 1/2 version
࣭
Displays the current software version.
࣭ 㻌 䠌䠎㻌 䠋㻌 䡔䠌䠌㻌
㻌 㻌 㻌
㻌
㻌
㻌
㻌
ճ
Displaying the working time
࣭
Displays the accumulated time since the power
was turned on.
࣭
The time for the internal fan that is always in op-
eration is equivalent to this accumulated time.
The time for the rear fan is shown in the section
յ
.
մ
Panel display time display
࣭
The accumulated time for the panel display being
ON is displayed as an indication of the time for the
panel being displayed.
This means that the time for when the display is
turned off using "SCREEN OFF" and the time for
when the "SCREEN SAVER" is activated and the
display is turned off are excluded from the opera-
tion time of
ճ
. The accumulated time does not
include the time for no signal.
յ
Rear fan operationg time display
࣭
Although the rear fan is operated according to the
internal temperature, the accumulated operation
time will be displayed.
ն Displaying the optional modules mounted
Ȇ
Displays the optional module currently mounted
!
on the monitor.
Ȇ
The following message appears when no corre-
sponding optional module is installed.
Ȩ Ѝ !
NO OPTION
ȩ!
Ȇ
The following appear when an optional module is
installed.
Ѝ
CM-70
㸸 When equipped with the CM-70.
Ѝ
SP-70
㸸
When equipped with the SP-70.
Ѝ
*****: Added as necessary with the version up.
շ FAN ERROR 1/2 display
Ȇ
If the internal or external fan on the rear side is
stopped, the message ”FAN ERROR!” is displayed,
which allows you to check which fan is stopped.
It is displayed with flashing red letters as de-
scribed below.
FAN ERROR 1: External fan on the back side.
FAN ERROR 2: Internal fan
Indicates the version of FPGA
that is mounted with a future
extension module. ”x00” indi-
cates that FPGA is not mounted.
Indicates the version of
FPGA that is mounted on
the main unit.