IKA ULTRA -TURRAX Tube Drive, Operating Instructions Manual

Page: 12 / 56

12
Unpacking
Unpack:
- Please unpack the device carefully.
- Any damage should be notified immediately to the shipping
agent (post office, railway network or logistics company).
Delivery scope:
- Tube Drive
- Plug-in power supply with interchangeable adapters
- Removal hook
- Operating instructions
- A warranty card.
Intended use
Use:
Application Volume Mode

with Tube ST-20...

with Tube ST-50...
Mixing
Stirring 2 - 15 ml
15 - 50 ml Seconds and
minutes mode

with Tube DT-20...

with Tube DT-50...
Dispersing
Stirring 5 - 15 ml
15 - 50 ml Seconds and
minutes mode

with Tube BMT-20...

with Tube BMT-50...
Crushing
Mixing
wet/dry 2 - 15 ml
15 - 50 ml Seconds and
minutes mode

with Tube BMT-20-S-IVD

BMT-20-C-IVD

Crushing
Mixing
wet/dry 2 - 15 ml Seconds and
minutes mode
Useful facts
Changes in viscosity and volume caused by processing of dispersion
media may cause small fluctuations in the speed of the device.
Pay attention to the ambient conditions listed in the “ Technical
Data ”.
Commissioning
Position the rotating knob (B) at the left stop
before starting up.
If these conditions are met, the unit is ready for
service when the mains plug has been plugged in.
Switching on:
Press “Power” button (A).
Previous mode and time settings will be
displayed e.g. :
(Factory setting: -2)
Range of use:
Indoor environments similar to that a laboratory of research, teaching,
trade or industry.
The safety of the user cannot be guaranteed:
- If the device is operated with accessories that are not supplied or
recommended by the manufacturer
- If the device is operated improperly contrary to the manufacture’s
specifications
- If the device is operated improperly contrary to the manufacturer’s
specifications.

Note: for BMT-20-S-IVD/BMT-20-C-IVD:
max. speed: scale 4
max. Timer: 1 min.