IKA T 10 basic, Operating Instructions Manual

Page: 17 / 28

Note: The speed table was calculated on the basis of a dispersion
volume of 5 ml water using the dispersing tool S10N-5G.
With other combinations (dispersion tools; medium quantity and
medium viscosity) can result other number of revolutions values.
Adjusting wheel scale 1 2 3 4 5 6
No-load speed 8.000 9.500 11.500 14.500 20.500 30.000
Speed with 7.900 9.400 11.400 14.450 20.450 29.900
5 ml water
The speeds depend on the dispersing element used as well as the
viscosity and quantity of the medium. It may, therefore, change
over the course of a dispersing process if the viscosity of the liquid
changes.
Speed range 1/min 8.000 - 30.000
(at nominal design voltage
and 50 Hz)
Speed display Scale
(see speed table)
Speed variation on load change % <6
Perm. ambient temperature °C 5 - 40
Perm. relative humidity % 80
Perm. on time (drive unit) min max 10 ON
min. 5 OFF
Overload protection / blocking protected locking bimetallic
switch; tempera
ture and power
sensitively
Protection to DIN EN 60529 IP30
Power consumption W 125
Power output W 75
Voltage VAC 220 - 240
(nominal design voltage 230V)
or VAC 115
or VAC 100
Frequency Hz 50/60
Noise (without dispersing element) dB(A) 65
Dimension (W x D x H) drive mm 46x57x201
Dimension clamp arm mm Ø8 / L100
Weight kg 0,4
Contamination level 2
Protection class II
Overvoltage categorie II
Operation at a terrestrial altitude m max. 2000 above
sea level
17
T10b 052005
Speed table Technical data