iiNet 300N Wireless Extender - Manual
19
Re-Enter Password
Input your new password here, again, to confirm it’s the same as
the New Password.
Management IP
The default is set to enable the DHCP client to obtain the IP
address automatically from your broadband modem.
IP Address
To set up the IP address of this iiNet Wireless Extender, input the
default IP address of the LAN / Wi-Fi port of the iiNet Wireless
Extender: 192.168.2.254.
Important Note:
If you assign one static IP to the iiNet Wireless Extender and you forget that IP, open your web
browser. To login to the iiNet wireless extender web page, input http://iiextender1234 in the ad-
dress bar. But remember to replace “1234” with the last four digits of your iiNet Wireless Extend-
er’s MAC serial number.
Or, to reset to the factory default settings, press the iiNet Wireless Extender’s WPS button and
hold it for 10 seconds.
Subnet Mask
A number that defines a range of IP addresses that can be used
in a network as a sub-set of the IP address you’re using.
Gateway Address
Input the gateway’s IP address of your network. Generally
you can use the default address 0.0.0.0 as the iiNet Wireless
Extender will access the Internet via the WAN port.
