iiNet 300N Wireless Extender - Manual
33
4
AP Mode
To build a wireless networking environment for your home or small office, switch the iiNet
Wireless Extender to AP (Access point) mode and connect it to your modem/router.
Anyone in your home will be able to access the internet wirelessly via this access point.
4.1 AP MODE: WEB BROWSER QUICK SETUP
Before you can connect to the iiNet Wireless Extender via the web browser you need
to ensure your computer can get an IP address automatically (a dynamic IP address).
If you’re unsure, read the 5: Configuring TCP/IP on Your PC to set your PC to use the
dynamic IP address.
4.2 CONNECT TO THE WEB CONFIGURATION MENU
Step 1
Open your web browser (Internet Explorer, Firefox etc). Click on
Favorites
or
Bookmarks
and select the iiNet wireless extender web page, which you saved during the iiNet
Wireless Extender’s installation and setup.
If you can’t find the page, input
http://iiextender1234
(replace
1234
with the last four
digits of your Extender’s MAC serial number,) into the address bar and press
ENTER
.
