background image

iiNet 300N Wireless Extender - Manual

40

ESSID

Extended Service Set ID (ESSID) is the identifying name of a wireless network. 
When set to ‘Enabled’, every wireless device can scan and find the iiNet Wireless Extender. 

FHSS

Frequency Hopping Spread Spectrum (FHSS) is a technique for the radio transmission of 
electromagnetic signals by jumping the carrier between various frequency channels on a 
wide frequency band.  

IEEE 802.11B STANDARD

The IEEE 802.11b is a Wi-Fi (Wireless LAN) standard. It’s used for wireless internet purposes 
- mainly to connect to the internet or a network wirelessly in small or home offices. 

IEEE 802.11G STANDARD

802.11g is the new IEEE standard for high-speed wireless LAN communications that 
provides for up to 54 Mbps data rate in the 2.4 GHz  bandwidth. 802.11g is quickly becoming 
the next mainstream wireless LAN technology for the home, office and public networks.  

IEEE 802.11 SUPPORTS THE FOLLOWING FUNCTIONS:

• 

CSMA/CA plus Acknowledge Protocol

• 

Multi-Channel Roaming

• 

Automatic Rate Selection

• 

RTS/CTS Feature

• 

Fragmentation

• 

Power Management

Summary of Contents for 300N Wireless Extender















































Reviews: