iiNet 300N Wireless Extender - Manual
26
The parameter Connected Access Point SSID is the SSID of the modem/router you selected
earlier. Check that all the information is correct.
If you need to change anything, press Back to select again. If everything’s fine, click
APPLY
and wait a few seconds for the iiNet Wireless Extender to reboot.
If your computer doesn’t save the iiNet wireless extender URL (web page) automatically, it
will prompt you to save it manually.
Click
OK
and revisit Step 4 and Step 5 until you get to the iiNet wireless extender page and
manually Save the page to your Favourites or Bookmark list.
When the iiNet Wireless Extender’s reboot is complete, the amber Signal status light on the
iiNet Wireless Extender remains steady, the WLAN status light flashes and the Power light is on.
Set up has been successful. Well done!
After the iiNet Wireless Extender has been set up, it will get the IP address from your
broadband router/modem automatically.
