56
In Case of Loss of Your I
N
FO
B
AR A01
~
~
~
~<MFZ>
ue14_as35_9e.fm
[56/56]
In the case of loss of your INFOBAR A01, calling the INFOBAR A01
from a specified phone number repeatedly allows you to remotely
prevent others from using the INFOBAR A01.
A
On the iida Home,
Settings
[
Location & security
[
Lock Setting
[
Remote lock
.
B
Enter Lock No.
[
OK
.
C
■
Activating the Remote Lock from a specified phone
number
Call the INFOBAR A01 from a phone number registered to the valid number
list with the set conditions (specified period/number of calls arrived).
■
Activating the Remote Lock with the Security Lock
Service
Even if the Remote lock is not set in advance, the Remote lock can be
activated by calling Customer Service Center or completing the
application process on au Customer Support from a PC.
The Security Lock Service is available free of charge.
■
Calling Customer Service Center for Activating/Canceling the
Remote lock
From an au phone:
113
without a prefix (toll free)
From any other cell phone or fixed-line phone:
0077-7-113
(toll free)
•
Open 24 hours
•
Follow the voice guidance to complete the application process.
■
Activating/Canceling the Remote lock with au Customer Support
Login to au Customer Support (
https://cs.kddi.com/
) and complete
the application process by following the on-screen instructions.
Setting Conditions for Activating the
Remote Lock
Valid
number list
Register up to three phone numbers.
1.
Add new
.
2.
Direct entry
[
Enter a phone number
[
.
You can select a phone number from
Use
address book
or
Use profile
. Also you can select
Payphone
.
Specified
period
Specify the time limit for receiving the number of
calls you have set for
Number of calls arrived
after
the first call is received.
Number of
calls
arrived
Set the number of calls to receive to activate the
Remote lock.
Remove
phone lock
Allow you to cancel the Remote lock by operating
the INFOBAR A01.
•
If you enable the setting, canceling the Remote
lock is available by operating the INFOBAR A01
or performing remote operation.
•
If you disable the setting, canceling the Remote
lock is available only by performing remote
operation.
•
To activate the Remote lock, notify the caller’s phone number.
•
The Remote lock cannot be activated when the INFOBAR A01 is turned off or
out of service area or
Offline mode
is set. If your INFOBAR A01 is in a location
where an adequate signal cannot be received, the Remote lock may not be
activated.
•
To cancel the Remote lock, call the INFOBAR A01 from a phone number
registered to the valid number list with the set conditions (specified period/
number of calls arrived).
•
The Remote lock cannot be activated or canceled when your au IC-Card is
not inserted or another’s au IC-Card is inserted.
•
You must fill out an application to use the Security Lock Service (the
application can be filled out even after your cell phone is lost).
as35_ue.book 56 ページ ２０１１年７月２０日 水曜日 午後２時２６分
Summary of Contents for INFOBAR A01
Page 1: ...June 2011 Edition ...
Page 64: ...June 2011 Edition ...
