II Morrow Apollo GX 50 User Manual Download

Page: 79 / 207

Waypoint Scan Key

The Waypoint Scan smart key allows you to select a

waypoint to get information about while viewing the

map.

1. Press the SCAN smart key.

2. Turn the LARGE knob to highlight the desired

waypoint identifier.

3. Press INFO to get information about the waypoint.

Press INFO to return to the map display. You may

also press DIRECT-TO and then ENTER to go

direct-to the highlighted airport.

4. Press the SCAN key again to return the LARGE

knob to normal operation.

Map Scale

The Map Scaling is controlled by turning the SMALL

knob while viewing the map. The map scale value

shown is the vertical height of the screen in nautical

miles. Map scale choices in nautical miles are: 0.1, 0.2,

0.5, 1, 2, 5, 10, 15, 20, 30, 40, 50, 75, 100, 150, 200, 250,

and auto. The auto selection automatically adjusts the

map scale so the “TO” remains at the top of the

display until the aircraft passes over the waypoint.
1. Press MAP.

2. Turn the SMALL knob to adjust the map scale.

3. Turn the LARGE knob to view the other Map

function displays.

Map and Nav

Info

The Map and Nav Info page of the Map function

provides a split screen showing the moving map and

selected navigation information. The navigation

information provided on the right side of the display

includes: the current TO waypoint identifier, distance

and bearing to the TO waypoint from your current

position, ground speed, aircraft current track, and the

map scale.

Moving Map Functions

MAP

SCAN

INFO

SCAN

Summary of Contents for Apollo GX 50
















































































































































































































Search results

Summary of Contents for Apollo GX 50

Reviews:

Related manuals for Apollo GX 50

Brands by name

Popular brands

II Morrow Apollo GX 50, User Manual

Search results

Summary of Contents for Apollo GX 50

Reviews:

Related manuals for Apollo GX 50

Brands by name

Popular brands