II Morrow Apollo GX 50 User Manual Download

Page: 112 / 207

Flight Plan

Editing

You can alter any of the information you entered into

the flight plans. The editing options include: Chg?,

Ins?, and Del?

•

Chg? - An existing waypoint can be changed if at

least one valid waypoint exists in the database.

•

Ins? - A waypoint can be inserted before an

existing waypoint if at least one valid waypoint

exists in the database. Inserting a new waypoint

into the Active flight plan before or after the

current TO waypoint does not affect the currently

active leg. Inserting a new waypoint into the

active leg’s TO waypoint will immediately change

navigation to the new TO waypoint.

•

Del? - An existing waypoint can be deleted if it is

not one of only two waypoints in the Active flight

plan, except if the From waypoint is indicated as

“Direct,” which can always be deleted. When the

“Direct” indicator is deleted, the waypoint that

was overwritten by “Direct” will return as the

original FROM waypoint. If you delete the

current TO waypoint, the NEXT waypoint, if

available, becomes the current TO waypoint. If

the last TO waypoint is deleted, the previous

From waypoint becomes the current To waypoint

and the active leg number will be reduced (i.e.

from leg 7 to leg 6).

Flight Plan Functions

WPT2

WPT1

(Departure WPT)

Present

Position

SLE

MMV

WPT5

Leg 1

Leg 2

Leg 3

Leg 4

CDI

Summary of Contents for Apollo GX 50
















































































































































































































Search results

Summary of Contents for Apollo GX 50

Reviews:

Related manuals for Apollo GX 50

Brands by name

Popular brands

II Morrow Apollo GX 50, User Manual

Search results

Summary of Contents for Apollo GX 50

Reviews:

Related manuals for Apollo GX 50

Brands by name

Popular brands