Draco tera
222
2017-09-06
Pos: 138 /806-IHSE/Betrieb/Ein- und Ausschaltfunktionen/480-xx/Factory Reset @ 7\mod_1309941081774_6.doc @ 53638 @ 3 @ 1
6.12.2 Factory Reset
You have the following option to perform a reset of the system:
If you perform a (factory) reset, all current settings and all configurations
stored in the matrix will be lost. This also applies to the network
parameters (reset to DHCP) and the admin password.
If a firmware update has been installed since the delivery, the matrix will
be set to the state defined there.
OSD
1. Select
Configuration > Factory Reset
in the main menu.
2. Confirm the selection with the
Okay
button.
The matrix will be reset to factory settings.
Pos: 139 /806-IHSE/Betrieb/Ein- und Ausschaltfunktionen/480-xx/480_Ausschalten @ 7\mod_1310646450471_6.doc @ 54300 @ 3 @ 1
6.12.3 Power Down
You have the following option to perform a shut down of the system or
single components:
OSD
In order to shut down the system, proceed as follows:
1. Select
Configuration > Shut down Matrix
in the main menu.
2. Confirm the selection with the
Okay
button.
The matrix will be shut down.
The fans will be switched to maximum speed after the shut down.
Then the matrix can be disconnected from the power supply.
In order to shut down an I/O board, proceed as follows:
1. Select
Configuration > Shut Down IO Board
in the main menu.
2. Confirm the selection with the
Okay
button.
The I/O board will be shut down.
Pos: 140 /806-IHSE/Betrieb/480_Zusammenfassung Tastaturkommandos/480_Zusammenfassung Tastatur Kommandos @ 9\mod_1360601486169_6.doc @ 71092 @ 2 @ 1