Draco tera
142
2017-09-06
Pos: 89 /806-IHSE/Konfiguration/480_Konsolen-Einstellungen/480-xx/Extender OSD @ 8\mod_1351502028499_6.doc @ 69501 @ 3 @ 1
5.13.3 Extender OSD
In this menu the settings for the Extender OSD can be adjusted. These
are local settings that can be made individually for each console.
You can select the following Extender OSD settings:
Field
Selection
Description
activated
When executing the key sequence for
opening the OSD, a selection list for
switching CPU Devices will be displayed
in the center of the monitor. Pressing the
<F7> button within the selection list
opens the standard OSD.
Enable CPU
Selection List
deactivated Function not active (default)
activated
Enable Extender OSD (default: YES)
Enable
Connection
Info
deactivated Function not active
activated
Update connection changes during fade-
in of Extender OSD (default: YES)
Update
Connection
Info
deactivated Function not active
Display Time
0-999
seconds
Duration of OSD fade-in (default: 10)
Horizontal
Position
10 pixels
Horizontal OSD position (default: -2)
Vertical
Position
10 pixels
Vertical OSD position (default: 2)
When setting the horizontal OSD position, a prefixed minus describes the
orientation to the right edge of the monitor, e.g. -2 means 2 x 10 = 20
pixels to this edge. When setting a vertical position, a prefixed minus
describes the orientation to the bottom edge of the monitor.
If the
Update Connections
function is deactivated, the Extender OSD
only appears when switching via OSD.
You have the following options to access the menu:
