Operation
2017-09-06
219
If a source (CPU Device) or a monitor (CON Device) is highlighted, the
respective live video appears in the live view that can be found in the right
lower corner.
New Monitor Layout
To create a new monitor layout proceed as follows:
1. Press the button
Open Designer...
in the symbol bar. To open the
desginer, an active connection to the matrix is obligatory.
The designer will be opened.
2. Press the button
New
in the symbol bar of the designer.
A new design will be opened.
3. Create new screens for your layout by pressing the button
Add Screen...
in the symbol bar.
A popup will be opened.
4. Select
the
CON Device
in the popup that should be used for the
intended screen. Define the following specifications if required:
–
Ratio
: aspect ratio
–
Title Position:
position of the monitor label
–
Orientation:
monitor orientation
5. Repeat step 4. for each new monitor.
6. To add switchable sources (computer/CPU) to the layout, press the
button
Add / Remove CPU...
.
7. Select the CPUs in the popup that should be used and insert those
into the list
CPU assigned.
8. Press the button
Settings
in the symbol bar to make further
necessary settings.
9. Enter the appropriate URL of the encoder under
Preview URL
that
should be used fpr the video preview.
(default:
rtsp://192.168.100.97/live1
)
10. Enter the appropriate URL of the encoder under
Screen URL
that
should be used for the monitor layout.
(Default:
rtsp://192.168.100.97/live2
)
11. Select the respective
Preview
und
Screen CON Devices
that are
connected to the encoder and confirm your settings with
Ok
.
