Draco tera
138
2017-09-06
You can select the following keyboard commands:
Function
Keyboard Command
Decrease assignment number of the extender
unit
<+>
Increase assignment number of the extender
unit
<->
In order to create a new console, proceed as follows:
1. Press
the
New
button.
2. Select a real console (
Create a real Console
) or a virtual console
(
Create a virtual Console
) or a template of an existing console
(
Choose template
).
A template can only be used, if there is at least on existing CON Device.
3. Press
the
OK
button.
4. Determine all parameters that are relevant for the console.
5. To confirm a created console, press the
Apply
button.
To run a CPU via a matrix, one or more CON Units (extender) must be
assigned. To place an assignment, proceed as follows:
1. Select the console in the
CON Devices
list that has to be assigned to
an extender.
2. Select the extender in the
Extender available
list that should be
assigned to the CON.
3. Perform the assignment by pressing the
>
button. To assign all
available extenders to the console, press the
>>
button. The
assignments are displayed in the
Extender assigned
list.
4. Confirm the assignment by pressing the
Apply
button.
In order to remove an extender assignment, proceed as follows:
1. Select the console in the
CON Devices
list to be modified.
2. Select the extender(s) in the
Extender assigned
list to be removed.
3. Remove the assignment with the
<
button. To remove all existing
assignments, press the
<<
button.
4. Confirm the changes by pressing the
Apply
button.
