SNMP Module
Operation
91
6.9 Powering Down and Resetting via Management Software
6.9.1 Powering Down the SNMP Module
NOTICE
After shutting down, the SNMP module can be disconnected from the power supply.
To shut down the SNMP module, proceed as follows:
1. Select
Device > Advanced Service > Shut down SNMP Board
in the menu bar.
An access window appears.
2. Enter the username and password of the administrator.
3. Click the
Ok
button.
Fig. 76
Management software dialog
Authentication required
A query to shut down the SNMP module appears.
4. Click the
Yes
button to start the shutdown.
Fig. 77
Management software dialog
Shut down SNMP Board
The current configuration is saved in the permanent memory of the SNMP module and the SNMP
module will be shut down.
After shutting down, a notification to power off the SNMP module appears.