Configuration via Management Software
SNMP Module
58
Assigning Parameter
To assign parameters of an extender unit to another extender unit, proceed as follows
1. Select
Extender & Devices > EXT Units
in the task area.
2. Click the
Activate Edit Mode
menu item in the toolbar.
3. Click the extender unit to be displayed.
4. Click the
Parameter
tab on the right side of the working area.
5. Click the
Read
button.
A query to read the parameters appears.
6. Click the
Yes
button to conform the reading.
7. Click the
Assign
button.
A query to assign the parameters appears.
8. Select the extender units the currently displayed parameters should be assign. By pressing the
<Ctrl>
key at the same time, more than one extender unit can be marked.
9. Click the
>
button to transmit the selected extender units to the selection. To transmit all selected
extender units to the selection, click the
>>
button.
10. Click the
Next
button.
Fig. 41
Management software menu
Extender & Devices - EXT Units - select extender units
A query to start the assignment appears.