SNMP Module
Configuration via Management Software
37
5.4 System Settings
After changing the IP address, the new IP address is required to connect to the management software after
restart.
5.4.1 Defining the SNMP Module
The parameters for the SNMP module are defined in this menu.
Fig. 26
Management software menu
System Settings - System
The following parameters can be configured:
System Settings
Parameter
Entry
Description
Device
Text
Enter the device name of the SNMP module (default: SNMP-01)
The device name is used as the host name in the network.
Name
Text
Enter the name of the configuration that is used to save the
current settings (default: Standard)
Info
Text
Additional text field to describe the configuration (default:
Factory settings)
To define parameters for the SNMP module, proceed as follows:
1. Select
Configuration > System
in the task area.
2. Click the
Activate Edit Mode
menu item in the toolbar.
3. Modify the desired settings.
4. Click the
Apply
button to confirm your entries.
5. Click the
Deactivate Edit Mode
menu item in the toolbar.