background image

To power the iW1 speaker ON:

1. Plug 

AC adaptor

 into 

Charging Base

, and plug into a live AC wall outlet.

2. Place the 

iW1 Speaker

 on top of the 

Charging Base

.

3. Slide the 

Master Power Switch

 to the ON position (on rear panel).

Note: 

 Allow 30 seconds for the speaker to startup before interacting with the iW1 speaker.

4. Press the       

Power

 button to switch between power ON and Standby mode.

The iW1 speaker will power ON to the last state. 

6

English

Getting Started

Master Power Switch

The iW1 has a master power switch that is used to power the unit ON or OFF, help conserve battery life, and reset the iW1 speaker.  In order 
for the iW1 speaker to power ON, the battery must be charged or unit must be connected to a AC outlet.

Master Power ON - Slide the 

Master Power Switch

 to the ON position (on rear panel) to activate your iW1 speaker.

Master Power OFF - Slide the 

Master Power Switch

 to the OFF position to power the iW1 speaker OFF.  

Note: 

  If the iW1 is in the Master Power OFF state the iW1 will only allow charging of the iW1’s internal battery and will not support 

iPod/iPhone charging, remote control commands, AirPlay, network setup, nor Firmware Updates.

Powering your iW1 speaker ON

off   

on

power

12V

outlet

aux-in

battery

off  

|  

on

iPod dock

power

reset

network setup

status

battery

off  

|  

on

power

1

2

3

30s for startup

The iW1 speaker has an internal rechargeable battery and supports audio playback any where in the home when the battery is charged or 
docked on it’s charging base with an AC adaptor.

To Charge the Battery:

1. Plug 

AC adaptor

 into 

Charging Base

, and plug into a live AC wall outlet.

2. Dock 

iW1 Speaker

 on top of 

Charging Base.

Note:

  Allow up to 10 hours to fully charge the iW1’s battery.

To view the Battery level status:

Press the             

Battery Preview

 button to view the charge status of the iW1’s internal battery on the top volume control panel. 

Rechargeable Battery

Status LED

Battery Level Preview

Current battery status level will show in place of volume level

        OFF when battery is fully charged
        Red, solid when battery is charging
        Red, blinking when battery needs charging

aux-in

battery

off  

|  

on

iPod dock

power

reset

network setup

status

battery

off  

|  

on

power

Summary of Contents for iW1 air series





















Reviews: