12
English
Questions? Visit www.ihomeaudio.com/support/airplay
Troubleshooting
Quick tips for problems with network setup:
Verify that your router is discoverable (must broadcast itself and not require user to type in the exact name).
Verify that the firmware of your router is up-to-date.
Must use WPA/WPA2 security (not WEP, or WPA/WPA2 enterprise).
Sometimes moving the iW1 closer to your access point (within 10-6 ft) during network setup. *this can happen sometimes when
multiple Wi-Fi networks are creating interference.
Try using our free and easy to use iHome Connect app available on the App Store.
Use the safari browser (Apple’s software tends to work best with it’s own technology).
Refresh the iHome Setup webpage (http://169.254.1.1) and selecting available networks a few times until it shows up.
Make sure that the SSID name of your home router consists of normal characters or digits, with no space or special characters
like %/#/* inserted.
Reset your router and start network setup over again.
iW1 Reset: Sometimes you simply need to reset the iW1 and start network setup over again.
- Unplug the AC jack or remove the iW1 from the charging base
- Slide the rear Power Switch to the OFF and then ON position
- Reconnect AC jack, place iW1 on charging base and wait 30 seconds
- Repeat iW1 Wi-Fi Network Setup process if necessary
1.
2.
3.
4.
5.
6.
7.
8.
9.
I want to find the iW1’s MAC address:
Turn on iW1, press and hold network setup button for 4 seconds, and wait for approximated 60 seconds. From your computer,
connect to the network named "iHome Setup ######"
On a Mac, open the "Terminal" application. On a PC, click Start -> Run, type "cmd" and click OK .
When the prompt appears, type "arp -a" and press Enter.
You may get a long list of items in response. Please find the line that reads similar to "ihome-iw1-e52431.local (169.254.1.1) at
c8:d5:fe:e5:24:31 on en1 [ethernet]" where the six hexadecimal pairs (c8:d5:fe:e5:24:31 in this example) represent the MAC
address for your iW1.
You can use this MAC address in your network's setup to allow the iW1 on your network.
Some network configurations may require you to know the iW1's MAC address. Follow these steps to determine your iW1's MAC
address:
Network setup when using a hidden SSID:
Setting up iW1 requires you to unhide your SSID. Don't worry, this is only temporary.
You can use your router's settings to change your security settings to un-hide your network's SSID. After doing so, the iW1 will be
able to detect, select, and join your network. Once the network setup is completed, you can re-hide your network's SSID. The iW1
will remain connected to your network after hiding your SSID.
1.
2.
3.
4.
5.
Summary of Contents for iW1 air series
Page 19: ......
Page 20: ...www ihomeaudio com ...
