13
English
Questions? Visit www.ihomeaudio.com/support/airplay
I’ve successfully connected the iW1 to
my home network, but I cannot select
the iW1 speaker from iTunes or my iOS
Device.
The iW1 speaker must be on the same Wi-Fi network as your AirPlay source.
Verify you have the latest version of iTunes and/or iOS.
Disable the firewalls software and security software, which may block ports that
AirPlay uses to stream content.
Try restarting iTunes or your iOS device.
Note:
The original iPhone, iPhone 3G, and iPod touch (1st gen) do not support AirPlay.
1.
2.
3.
4.
No AirPlay icon in iTunes or on my
iPad/iPhone/iPod touch
Make sure that the device has already joined the AirPlay network.
Before you open iTunes, make sure that you have enabled Bonjour service in your PC.
Take Windows XP for example: to enable the service, you can click Start->Settings-
>Control Panel, and doubleclick Administrative Tools-> Services->Bonjour Service,
then click Start followed by OK on the pop-up menu.
Within iTunes open “Preferences”, Select the “Devices” tab, and activate the following
option that says “Allow iTunes control from remote speakers.”
Try restarting iTunes or your iOS device.
Note:
The original iPhone, iPhone 3G, and iPod touch (1st gen) do not support AirPlay.
1.
2.
3.
4.
Problems
Solution
I am unable to connect the iW1 to my
home Wi-Fi network.
Verify that your Wi-Fi network is functioning and Wi-Fi certified. This device is only
compatible with Wi-Fi certified routers.
Move the iW1 closer to your network access point; the Wi-Fi signal is weak or there are
overlapping Wi-Fi signals or the iW1 is out of range of your Wi-Fi network.
Enable SSID broadcast (un-hide network) on the Wi-Fi router. After you have success-
fully connected the iW1 speaker to your Wi-Fi network you can then re-hide the
network.
Use a WPA or WPA2 Personal key for security. We do not recommend the use any WEP
key for security and WPA/WPA2 enterprise is not compatibile with AirPlay.
Keep away from potential sources of interference which may affect Wi-Fi signal, such
as microwave ovens.
Make sure that the SSID name of your home router consists of normal characters or
digits, with no space or special characters like %/#/* inserted.
If you choose to rename the AirPlay device ‘iHome iW1 XXXX’ in the setting menu, do
not use special characters or symbols.
Reset the iW1 Hardware and repeat network setup:
- Unplug the AC jack/remove the iW1 from the charging base.
- Slide the rear Power Switch to the OFF and then ON position.
- Reconnect AC jack, place iW1 on charging base and wait 30 seconds for the iW1
speaker to restart.
- Repeat iW1 Wi-Fi Network Setup process.
If the problem remains, it is strongly recommended to use our free iHome Connect
app for your iPod Touch/iPhone/iPad to do the first time Wi-Fi setup as some PC
settings may affect the Wi-Fi network setup.
1.
2.
3.
4.
5.
6.
7.
8.
9.
AirPlay & Network Setup
Summary of Contents for iW1 air series
Page 19: ......
Page 20: ...www ihomeaudio com ...
