Questions? Visit www.ihomeaudio.com/support/airplay
Battery may be dead or low. Return the iW1 to it’s charging base.
Verify that the adaptor is connected and the power outlet is always ‘live’ (not
controlled by a wall switch).
Reset the iW1 Hardware:
- Unplug the AC jack/remove the iW1 from the charging base.
- Slide the rear Power Switch to the OFF and then ON position.
- Reconnect AC jack, place iW1 on charging base and wait 30 seconds.
1.
2.
3.
The iW1 doesn’t respond or doesn’t
turn ON.
No sound.
Verify that the volume is not muted or set to 0.
Verify the mode (AirPlay Wireless or iPod mode).
Verify iPod or iPhone is properly docked with the USB sync cable and connected to the
iW1’s USB port.
Verify that there is not another iTunes library or iOS device connected to the iW1
speaker.
Check the network connection. Set up the network again if needed.
Try restarting iTunes or your iOS device.
1.
2.
3.
4.
5.
6.
iPhone/iPod doesn’t charge or play
audio in iPod mode.
iPhone/iPod is not docked properly – Remove disconnect your iPhone/iPod from the
USB sync cable and check for obstruction on the connectors in the USB sync cable, on
your iPhone/iPod, or USB port on the iW1.
Reset your iPhone/iPod - Please see the user manual or the Apple web site for details.
Typically, holding the sleep button and the home button on a newer iPad, iPhone or
iPod will reset it.
Upgrade the software on your iPad, iPhone or iPod to the latest version by connecting
it to a computer with iTunes installed and checking through iTunes that your unit has
the most recent software. Update if needed.
Verify that the iW1 is compatible with your iPod or iPhone:
iPod touch (1st, 2nd, 3rd, and 4th generation), iPod nano (2nd, 3rd, 4th, 5th, and 6th
generation), iPhone 4, iPhone 3GS, and iPhone 3G.
1.
2.
3.
4.
5.
6.
Sound crackles, is distorted, has a loud
hum or buzzing.
Turn the iPod device or other source compent’s volume down.
Make sure that the iPod’s device EQ setting is set to “OFF.”
Make sure that the USB sync cable is plugged all the way into your iPod or iPhone and
connected all the way to the iW1’s USB port.
Make sure that the audio cable is plugged all the way into the iW1’s Aux Input jack.
Replace the aux-in cable or iPod sync cable.
Unplug the power supply and connect it to a different AC outlet.
1.
2.
3.
4.
5.
15
English
Problems
Solution
General
Summary of Contents for iW1 air series
Page 19: ......
Page 20: ...www ihomeaudio com ...
