11
English
Control
The iW1 is a member of our iHome Studio Series and features Bongiovi Acoustics DPS (Digital Power Station), representing a genuine
breakthrough in audio processing. This unique and powerful prossesor, years in the making, was developed by a team of audio engineers
that have over 40 years of experience in the music and motion picture recording industries. Audio is digitally restored in real time, adding
missing harmonics, improving clarity, presence, and bass resonance. Your music comes alive in ways never before possible.
The Bongiovi DPS function is on by default and can only be turned off or on with the IR remote. Front Status LED will flash Green when DSP
is turned OFF or ON via the remote.
BonGiovi DPS
Firmware update
It may be necessary to update the firmware of your iW1 speaker to ensure the latest compatibility and optimal functionality. The iW1’s
firmware can be updated using a USB Mass Storage device containing a new firmware image downloaded by the user from
www.ihomeaudio.com (register for an iHome account on our website to receive emails about FW updates).
Using a USB Mass Storage device:
1. Download the latest firmware from www.ihomeaudio.com/airplay/support to your computer.
2. Load downloaded firmware to a USB mass storage device.
3. Connect USB device
4. Press & Hold (3 sec).
5. iW1 will scan for firmware file local to the USB device.
If a valid firmware file is found, iW1 firmware will update. If no valid firmware is found user must reset the iW1, load the proper file on USB
stick, and attempt Firmware update again.
During Firware Update:
When Firmware is being Updated, All top panel controls will PULSE and be inactive. All buttons are inactive except for Reset button. If
firmware update is succcessful, a confirmation (positive) tone will sound.
iW1 Speaker Firmware Updates
The iW1 has an EQ feature that is controlled via the remote that adjusts Bass and Treble.
/- buttons: Adjust treble levels between -5 and +5. Default is 0
BASS +/- buttons: Adjust treble levels between -5 and +5. Default is 0
Note:
The Front Status LED will flash Green 3 times when the eq reaches maximum or minimum and then return to last status settings.
RESET button (remote): Resets EQ adjustments to the following state: Bass:0, Treble0.
Note:
When Reset button is pressed, Top Panel LEDs will flash 2 times and then return to last status settings.
EQ
Summary of Contents for iW1 air series
Page 19: ......
Page 20: ...www ihomeaudio com ...
