10. This device requires a medical AC adapter with an output of DC 5.0V that complies with IEC 60601-1/UL 60601-1 and IEC
60601-1-2 such as OH-1048A0501000U2(input: 100-240V, 50/60Hz; output: DC 5V, 1.0A). Please note that the monitor jack
size is USB Micro B. The USB jack should be used for charging only.
This Monitor is designed for adults and should never be used on infants, young children, pregnant or pre-eclamptic
patients. Consult your physician before use on children.
This product might not meet its performance specifications if stored or used outside the specified temperature and
humidity ranges.
Please do not share the cuff with any infectious person to avoid cross-infection.
Please do not share the cuff with any infectious person to avoid cross-infection.
BATTERY HANDLING AND USAGE
• When the monitor is connected to the mobile device, the battery charge will be displayed on the mobile device. If the power is
less than 25%, please charge the battery. The monitor will not work until the battery has enough power.
• When the monitor needs charging, please connect the monitor to a power source. The monitor can work normally while
charging.
• You should charge the battery when the battery is less than 25% charged. Overcharging the battery may reduce its lifetime.
• When in charging mode, the LED on the device will be displayed with different colous indicating the charging status. See the
table below for details.
Monitor Status
Status Indicator
Charging
Flashing green light
Fully charged
Steady green light
Low battery
Flashing red light (for a few seconds)
Abnormal state
Steady red light
Do not change the battery. If the battery can no longer be charged, please contact Customer Service.
Overcharging the battery may reduce its lifetime.
Lithium battery replacement by inadequately trained personnel could result in a hazard such as a fire or explosion.
Do not plug or unplug the power cord into the electrical outlet with wet hands. If the AC adapter is abnormal, please
change the adapter.
Do not pull out the adapter when you are using the monitor.
Do not use when charging.
The monitor, cable, battery and cuff must be disposed of according to local regulations at the end of their usage.
Note:
Battery life and charge cycles vary by use and settings.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
Low Battery
Battery is less than 25%
Charge the battery
Display reads
“ERROR”
Blood pressure is outside of measurement
range
Retest and contact your health professional if blood
pressure measurement is still outside of normal range
Arm or monitor was moved during test
Retest, make sure not to move your arm or the monitor
The cuff does not inflate properly or
pressure falls quickly during test
Review the cuff application instructions and retest
The cuff was not properly applied
Review the cuff application instructions and retest
Display reads
an abnormal
result
The cuff position was not correct or it was
not properly tightened
Review the cuff application instructions and retest
Body posture was not correct during testing
Review body posture instructions and retest
