background image

Frequency Band: 2.402-2.480 GHz

11.Environmental temperature for operation: 10°C-40°C(50°F -104°F)

12. Environmental humidity for operation:

85%RH

13. Environmental temperature for storage and transport:-20°C-55°C(-4°F-131°F)

14. Environmental humidity for storage and transport:

85%RH

15. Environmental pressure: 80kPa-105kPa

16. Battery life: more than 500 measurements on a full charge, the battery can maintain the performance characteristics for a

minimum of 300 charge cycles

17.The blood pressure measurement system includes accessories: pump, valve, cuff, and sensor.

Note:

These specifications are subject to change without notice.

GENERAL SAFETY AND PRECAUTIONS

1. Read all of the information in the User Guide and other provided instructions before operating the unit.

2. Consult your physician for any of the following situations:

a)The application of the cuff over a wound or inflamed area.

b)The application of the cuff on any limb with intravascular access or therapy, or an arteriovenous (A-V) shunt.

c)The application of the cuff on the arm on the side of a mastectomy.

d)Simultaneous use with other medical monitoring equipment on the same limb.

e)The blood circulation of the user needs to be checked.

3. Do not use this product in a moving vehicle as this may result in inaccurate measurements.

4. Blood pressure measurements determined by this product are equivalent to those obtained by professional healthcare

practitioners using the cuff/stethoscope auscultation method within the limits prescribed by the American National Standard,

Electronic or Automated Sphygmomanometer.

5. If you are using a smart phone to operate the device and a phone call comes in during the measurement, the measurement

process will be terminated automatically. It is thus recommended that the phone be set in Airplane mode during measurement

to avoid interrupting the measurement.

6. If an Irregular Heartbeat (IHB) is detected during the measurement procedure, the IHB symbol will be displayed. Under this

condition, the Wireless Blood Pressure Monitor can keep functioning, but the results may be inaccurate. Please consult your

physician for accurate assessment.

The IHB symbol will be displayed under 2 sets of circumstances:

1)The coefficient of variation (CV) of pulse period >25%.

2)The difference of adjacent pulse period is

0.14s and more than 53 percent of the total number of pulses readings falls

within this definition.

7. Please do not use any cuff other than that supplied by the manufacturer as this may result in inaccurate measurements.

8. For information regarding potential electromagnetic or other interference between the Wireless Blood Pressure Monitor and

other devices together with advice regarding avoidance of such interference, please see ELECTROMAGNETIC

COMPATIBILITY INFORMATION. It is suggested that the Wireless Blood Pressure Monitor should be operated at least 10

metres away from electric or wireless devices (e.g. routers, microwave oven, etc.)

9. If the blood pressure measurement (systolic or diastolic) is outside the rated range specified in part SPECIFICATIONS, the

app will immediately display a technical alarm on the screen. In this case, repeat the measurement ensuring that the proper

measurement procedures are followed and/or consult with your medical professional.The technical alarm is preset in the

factory and cannot be adjusted or inactivated. This technical alarm is assigned as low priority according to IEC 60601-1-8. The

technical alarm does not need to be reset.

Summary of Contents for BP3













Reviews: