background image

 

8

 

/

 

16

 

 

 

 
 
 
 

Bluetooth connected          Syncing            Syncing 

      Sync finished      

SYNC TIME AND SETTINGS 

Automatic mode is disabled before automatic test parameters are set. Using APP to configuration automatic mode 

parameters. Time and date on the device will be automatically sync with your smart device when the Bluetooth 

connection is established.       

 

MEASUREMENT PROCEDURES 

Blood pressure can be affected by the position of the cuff and your physiologic condition. It is very important that the 

cuff should be placed at the same level as your heart. 

Body Posture

 

Sitting Comfortably During Measurement 

a. 

Relax and be quiet during measurement, avoid talking and movement. 

b. 

  When measuring in the standing position, let the cuffed arm hang relaxed, slightly away from the body. 

c. 

  When measuring in the sitting position, the arm should be supported at heart level.   

d. 

Avoid flexing the muscles or moving the hand and fingers of the cuffed arm during the measurement 

Lying Down During Measurement 

a. Lie on your back. 

b. Place your arm straight along your side with your hand palm-side up. 

c. The cuff should be placed at the same level as your heart. 

Note: Blood pressure can be affected by the position of the cuff and your 

physiologic condition. 

 

Fitting a Patient with the ABPM Cuff 

a. 

Pull the cuff end through the metal loop, positioning it outward (away from your 

patient 

body). 

b. 

Place a bare arm through the cuff and position the cuff 1/2"(1-2cm) above the elbow joint. 

c. 

Tighten the cuff by pulling it towards your body, securing it closed with the Velcro fastener. 

d. 

While seated, place your hand, palm-side up, in front of you on a flat surface such as a desk or table.   

         When the left arm is measured, position the monitor in the middle of your arm so that it is aligned with your 

middle finger. 

When the right arm is measured, position the monitor in the middle of your arm so that it is aligned with your 

middle finger, the “up and down” position is opposite. 

e. 

The cuff should fit comfortably, yet snugly around your arm. You should be able to insert one finger between your 

arm and the cuff.   

Summary of Contents for ABP100

















Reviews: