14
/
16
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Please take attention that changes or modification not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This product complies with Industry Canada. IC: RSS-210
IC NOTICE
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference, and
(2)this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum
(or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users,
the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more
than that necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie
Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut
choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas
l'intensité nécessaire à l'établissement d'une communication satisfaisante.
Hereby, [ANDON HEALTH CO., LTD.] declares that the equipment type [ABP100] is incompliance with Directive
2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
www.ihealthlabs.eu
OTHER STANDARDS AND COMPLIANCES
The iHealth CardioMed Ambulatory Blood Pressure Monitor corresponds to the following standards:
IEC 60601-1Edition 3.1 2012-08/EN 60601-1:2006/A1:2013 (Medical electrical equipment -- Part 1: General
requirements for basic safety and essential performance);
IEC 60601-1-2:2014/EN 60601-1-2:2007/AC:2010(Medical electrical equipment -- Part 1-2: General requirements for
basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests);
IEC80601-2-30:2009+AMD1
：
2013/EN 80601-2-30:2010/A1
：
2015(Medical electrical equipment –Part 2-30: Particular
requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers);
EN 1060-1: 1995 + A2: 2009 (Non-invasive sphygmomanometers - Part 1: General requirements),;
EN 1060-3: 1997 + A2: 2009 (Non-invasive sphygmomanometers - Part 3: Supplementary requirements for
electro-mechanical blood pressure measuring systems);
