10
/
16
TAKING YOUR BLOOD PRESSURE READING AUTOMATICALLY
a.
Long press the
for at least 2 seconds to switch on or off the "Automatic
Mode", the monitor shows current automatic mode on the LED screen. If the
monitor has no automatic mode parameters, the monitor shows "- -" on the LED
monitor. If the monitor has finished the automatic test, the monitor shows "END" on
the LED monitor.
b.
In the automatic mode, the LED screen is turned off by default. During the test,
short press any button to turn on the LED screen and it will last to the end of this
measurement.
c.
When "Auto Mode" on ,while not in a measurement, short press any button to turn on the LED screen and
the LED screen shows the last measurement result.
d.
When "Auto Mode" on, the monitor will continue take measurements in the
scheduled time, and after the monitor get enough readings, the monitor automatic
stop taking readings.
Note: Please consult a health care professional for interpretation of pressure
measurements.
BLOOD PRESSURE CLASSIFICATION FOR ADULTS
The World Health Organization (WHO) has created the following guide for assessing high blood pressure (without
regard to age or gender). Please note that other factors (e.g. diabetes, obesity, smoking, etc.) also need to be
considered. Consult with your physician for accurate assessment.
Note: Consult your physician for proper interpretation of blood pressure results.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
Low Battery
Battery do not have enough power Charge the battery
LED display reads
“Er0”
Pressure system is unstable
before measurement
Retest, make sure not to move
your arm or the monitor
