IFT Evolve 300 CX, Instruction Manual

Page: 8 / 56

8
PLEASE NOTE: This checklist is NOT intended to replace the content included in this
instruction manual. Although it can be used as a quick start guide, we strongly suggest
reading through this manual completely before proceeding.

Remove and inspect all contents

Connect the DC charger to a suitable power source (the included AC adapter or
another suitable power supply, battery or DC power source)

Begin charging the LiPo flight battery (connect it to the charger)

Install the four (4) AA batteries in the transmitter and turn it on

Install the LiPo flight battery in the helicopter (after it’s been fully charged) and
connect it to the control unit

Test the controls to confirm proper operation

Familiarize yourself with the controls

Find a suitable area for flying
PLEASE NOTE: This checklist is NOT intended to replace the content included in this
instruction manual. Although it can be used as a quick start guide, we strongly suggest
reading through this manual completely before proceeding.

Always turn the transmitter on first

Connect the LiPo flight battery to the control unit

Allow the control unit to initialize and arm properly (on a flat/level surface)

Fly the model (take ‐ off from a flat/level surface)

Land the model (land on a flat/level surface)

Disconnect the LiPo flight battery from the control unit

Always turn the transmitter off last
Flight Checklist
Before the First Flight Checklist (RTF version only)