IFT Evolve 300 CX, Instruction Manual

Page: 20 / 56

20
The right ‐ hand stick controls both the elevator (pitch fore/aft) and aileron (roll) channels.
Pushing the stick upward/forward will pitch the nose of the helicopter downward, allowing it
to be flown forward. This is accomplished by having the elevator (left ‐ hand) servo push the
swashplate upward.
Pulling the right ‐ hand stick downward/backward will pitch the tail of the helicopter
downward, allowing it to be flown backward. This is accomplished by having the elevator
(left ‐ hand) servo pull the swashplate downward.
The elevator trim lever (located immediately to the left of the right ‐ hand stick) can be used to
help keep the helicopter from drifting forward or backward when hovering and with no right ‐
hand stick/elevator control input. For example, if the helicopter drifts forward when hovering
slide the elevator trim lever downward until the helicopter hovers as level as possible without
drifting forward.