![background image](http://html.mh-extra.com/html/ifm/sm4x00/sm4x00_operating-instructions-manual_620746025.webp)
25
UK
Parameters Explanation and setting options (→ 4 Function)
SP1 / rP1
Maximum / minimum value for volumetric flow on OUT1�
ImPS
Pulse value = volumetric flow quantity at which 1 pulse is delivered�
ImPR
Configuration of the output for consumed quantity monitoring:
YES (pulse signal), no (switching signal)�
ou1
Output function for OUT1 (volumetric flow):
-Hno, Hnc, Fno, Fnc: switching signal for the limits
-ImP: consumed quantity monitoring (totaliser function)
-dir�F: detection of direction
ou2
Output function for OUT2 (volumetric flow or temperature):
-Hno, Hnc, Fno, Fnc: switching signal for the limits
-I (current signal 4���20 mA), U (voltage signal 0���10 V)
-dir�F: detection of direction
Input function for OUT2:
-In�D: input for external meter reset signal
ASP2 / AEP2 Analogue start point / analogue end point for volumetric flow or tempera-
ture on OUT2�
SP2 / rP2
Maximum / minimum value for volumetric flow or temperature on OUT2�
DIn2
Configuration of the input for external meter reset signal:
HIGH, +EDG, LOW, -EDG
EF Extended functions: opening of the lower menu level�
Hi�F / Hi�T Maximum value memory for volumetric flow / temperature�
Lo�F / Lo�T Minimum value memory for volumetric flow / temperature�
FOU1 / FOU2 Behaviour of OUT1 / OUT2 in case of an internal fault:
�
dST Start-up delay in seconds�
P-n Output logic: PnP, nPn�
dAP Measured value damping: damping constant in seconds�
rTo rES�T (meter reset: manual), h/d/w (time-controlled: hours/days/weeks),
OFF�
diS Update rate and orientation of the display: d1���d3, rd1���rd3, OFF
uni Standard unit of measurement for volumetric flow
SELd Standard measured variable of the display: FLOW (volumetric flow value),
TEMP (medium temperature), TOTL (meter reading)�
SEL2 Standard unit of measurement for evaluation by OUT2:
FLOW (volumetric flow) or TEMP (temperature)�