![background image](http://html.mh-extra.com/html/ifm/sm4x00/sm4x00_operating-instructions-manual_620746016.webp)
16
For the IODDs necessary for the configuration of the unit, detailed information
about process data structure, diagnostic information, parameter addresses and
the necessary information about the required IO-Link hardware and software visit
www�ifm�com�
5 Mounting
►
Ensure that the system is free of pressure during installation�
►
Ensure that no media can leak at the mounting location during installa-
tion�
►
Attach the supplied warning label to the sensor cable�
The unit can be installed independently of the orientation if the following is
ensured:
-No air bubbles can form in the pipe system�
-The pipes are always completely filled�
5.1 Recommended installation position
►
Install the unit so that the measuring pipe is always completely filled�
►
Arrange for inlet and outlet pipe lengths� Disturbances caused by bends,
valves, reductions, etc� are compensated for� It applies in particular: no shut-off
and control devices are allowed directly in front of the unit�
5 x D
F
S
2 x D
S
S = disturbance (e�g� shut-off / control device, pump, bends)
D = pipe diameter
F = direction of flow