background image

3

UK

1  Preliminary note

1.1  Symbols used

Instruction

>

Reaction, result

[…] Designation of pushbuttons, buttons or indications

Cross-reference

Important note 

Non-compliance can result in malfunction or interference�

2  Safety instructions

•  The device described is a subcomponent for integration into a system�

 -The manufacturer of the system is responsible for the safety of the system�
 -The system manufacturer undertakes to perform a risk assessment and to 

create a documentation in accordance with legal and normative requirements 

to be provided to the operator and user of the system� This documentation 

must contain all necessary information and safety instructions for the operator, 

the user and, if applicable, for any service personnel authorised by the 

manufacturer of the system�

•  Read this document before setting up the product and keep it during the entire 

service life�

9�3�3  Configuration of the display ����������������������������������������������������������������15

9�3�4  Zero-point calibration ��������������������������������������������������������������������������16

9�3�5  Differential pressure measurement: optimisation of the sensor 

accuracy �������������������������������������������������������������������������������������������������������16

9�4  Service functions �����������������������������������������������������������������������������������������16

9�4�1  Read min/max values for the system pressure ����������������������������������16

9�4�2  Reset all parameters to factory setting �����������������������������������������������17

10 Operation ���������������������������������������������������������������������������������������������������������17

10�1  Read set parameters ���������������������������������������������������������������������������������17

10�2  Error indications �����������������������������������������������������������������������������������������17

11  Factory setting �������������������������������������������������������������������������������������������������18

Summary of Contents for PQ3 Series




















Reviews: