![background image](http://html1.mh-extra.com/html/ifm/pq3-series/pq3-series_operating-instructions-manual_4150758007.webp)
7
UK
5 Installation
Before installing and removing the unit: Make sure that no pressure is
applied to the system�
►
Screw the pressure connection or adapter G1/8 to
the main pressure connection (1) and tighten:
• Maximum tightening torque: 8 Nm�
• Maximum thread length: 7�5mm
►
If required: Screw the pressure connection or adapter
M5 to the auxiliary pressure connection (2) and
slightly tighten
to avoid damage to the thread:
• Maximum tightening torque: 2�5 Nm�
• Maximum thread length: 7�5mm
5.1 Mounting accessories
The following components can be supplied as accessories:
Order no�
Mounting set for DIN rail mounting (DIN rail TH 35-7�5 to EN 60715)
E37340
5.2 DIN rail mounting
DIN rail TH 35-7�5 to EN 60715
20
►
Fix the mounting clip (1) with the M4 x 35 screws (2) to the flange�
Maximum tightening torque: 0�5 Nm�
►
Hook the unit into the DIN rail and clip it into place�
Removal:
►
Lever out the mounting clip with a screwdriver at the top or at the bottom and
remove the unit�