20
10.4 Output response in different operating states
OUT1
OUT2
Initialisation
OFF
OFF
Normal
operation
acc� to level and
[ou1] setting
acc� to process value ([SEL2]
setting) and [ou2] setting
Fault
acc� to setting [FOU1]
acc� to setting [FOU2]
11 Technical data and scale drawing
Technical data sheet and scale drawing at: → www.ifm.com
12 Maintenance / Transport
►
Clean the sensor tip at regular intervals to avoid contamination over time or
formation of deposits�
► Do not use any hard or sharp objects (such as wire brushes) if you clean the
sensor manually since they could damage the sensor�
►
Check the sensor and the mounting adapter at regular intervals and tighten
again, if necessary�
After removal of the unit or a change of media with dielectric constants
that differ greatly (e.g. oil / water) another adjustment should be carried
out�
►
It is not possible to repair the unit�
►
After use dispose of the unit in an environmentally friendly way in accordance
with the applicable national regulations�
►
In case of returns ensure that the unit is free from soiling, especially from
dangerous and toxic substances�
►
For transport only use appropriate packaging to avoid damage of the unit�
