Inclination sensor JN
4
1 Preliminary note
Technical data, approvals, accessories and further information at www.ifm.com.
This document applies to the device of type „inclination sensor“ (art. no.: JN2100).
It is part of the device.
This document is intended for specialists. These specialists are people who are
qualified by their appropriate training and their experience to see risks and to
avoid possible hazards that may be caused during operation or maintenance of
the device. The document contains information about the correct handling of the
device.
Read this document before use to familiarise yourself with operating conditions,
installation and operation. Keep this document during the entire duration of use of
the device.
Adhere to the safety instructions.
1.1 Symbols used
►
Instructions
>
Reaction, result
[…]
Designation of keys, buttons or indications
→
Cross-reference
Important note
Non-compliance may result in malfunction or interference.
Information
Supplementary note
2 Safety instructions
●
Read this document before setting up the product and keep it during the entire
service life.
●
The product must be suitable for the corresponding applications and environ-
mental conditions without any restrictions.
●
Only use the product for its intended purpose (Functions and features).
●
If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur.
●
The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator.
●
Installation, electrical connection, set-up, operation and maintenance of the unit
must be carried out by qualified personnel authorised by the machine operator.
●
Protect units and cables against damage.