ClassicController CR0053
16
ifm electronic gmbh
●
Friedrichstraße 1
●
45128 Essen We reserve the right to make technical alterations without prior notice!
14.06.2016
CR0053 / page 2
CR0053
Technical data
Control systems
Serial interface
Baud rate
Topology
Protocol
RS-232 C
9.6...115.2 Kbits/s (default 115.2 Kbits/s)
Point-to-point (max. 2 participants); master-slave connection
Prede
ned ifm protocol (INTELHEX)
Virtual COM port
USB, max. 1 MBaud
Processor
32-bit CPU In
neon TriCore 1796
Device monitoring
Undervoltage monitoring
Watchdog function
Checksum test for program and system
Excess temperature monitoring
Process monitoring concept
Second switch-off mode for 8 outputs each via a relay
Physical memory
Flash: 2 Mbytes
RAM: 2 Mbytes
Remanent memory: 128 Kbytes
Memory allocation
See system manual
www.ifm.com
→
Data sheet search
→
CR0053
→
More information
Software/programming
Programming system
CODESYS version 2.3 (IEC 61131-3)
Indicators
Status LED
Three-colour LED (R/G/B)
Operating states
No longer valid if the colours and/or
ashing modes are changed by the
application program.
LED colour
Status
Description
–
Off
No operating voltage or fatal error
Yellow
1 x on
Initialisation or reset checks
Orange
On
Error in the start-up phase
Green
5 Hz
No operating system loaded
2 Hz
Run
On
Stop
Red
2 Hz
Run with error
On
Fatal error or stop with error
