IFM DTC600 Operating Instructions Manual Download Page 57

Page: 57 / 61

SDO error code

Description

Possible cause

0x08000000

General Error.

0x08000020

Data cannot be transferred
to the application or be
stored.

Error read or write access of
the ID tag. Detailed informa-
tion in the device status ob-
ject (0x2150).

0x08000021

Data cannot be transferred
to the application or be
stored due to a local control-
ler.

0x08000022

Data cannot be transferred
to the application or stored
due to the current device
status.

0x08000023

The dynamic generation of
the object directory fails or
no object directory is pres-
ent (e.g. object directory is
generated from the file and
the generation fails because
of a file error).

0x08000024

No data available.

Data length = 0

9.3 EDS file

The

EDS

file serves as a template for different configurations of a device type.

The EDS file is turned into a DCF file which contains device configurations, object
values,

Node ID

and bit rate.

CANopen configuration tools are available for the configuration of the

CANopen

network and the devices.

The EDS files are available on ifm’s website:

www.ifm.com

Contents of the EDS file:

• Communication functions and

objects

(to CANopen profile DS-301)

• Manufacturer-specific objects

Summary of Contents for DTC600






























































Search results

Summary of Contents for DTC600

Reviews:

Related manuals for DTC600

Brands by name

Popular brands

IFM DTC600, Operating Instructions Manual

Search results

Summary of Contents for DTC600

Reviews:

Related manuals for DTC600

Brands by name

Popular brands