![background image](http://html1.mh-extra.com/html/ifm/basiccontroller-cr0431/basiccontroller-cr0431_programming-manual_3915933216.webp)
216
ifm
Programming Manual BasicController relay CR0431 v03.03.00
05 / 2018
Terms and abbreviations
>
I
ID
ID =
Id
entifier
Name to differentiate the devices / participants connected to a system or the message packets
transmitted between the participants.
>
IEC 61131
Standard: Basics of programmable logic controllers
• Part 1: General information
• Part 2: Production equipment requirements and tests
• Part 3: Programming languages
• Part 5: Communication
• Part 7: Fuzzy Control Programming
>
IEC user cycle
IEC user cycle = PLC cycle in the CODESYS application program.
>
Instructions
Superordinate word for one of the following terms:
installation instructions, data sheet, user information, operating instructions, device manual, installation
information, online help, system manual, programming manual, etc.
>
Intended use
Use of a product in accordance with the information provided in the instructions for use.
>
IP address
IP =
I
nternet
P
rotocol.
The IP address is a number which is necessary to clearly identify an internet participant. For the sake
of clarity the number is written in 4 decimal values, e.g. 127.215.205.156.
>
ISO 11898
Standard: Road vehicles
– Controller area network
• Part 1: Data link layer and physical signalling
• Part 2: High-speed medium access unit
• Part 3: Low-speed, fault-tolerant, medium dependent interface
• Part 4: Time-triggered communication
• Part 5: High-speed medium access unit with low-power mode
>
ISO 11992
Standard: Interchange of digital information on electrical connections between towing and towed
vehicles
• Part 1: Physical and data-link layers
• Part 2: Application layer for brakes and running gear
• Part 3: Application layer for equipment other than brakes and running gear
• Part 4: Diagnostics
Summary of Contents for BasicController CR0431
Page 228: ...228 10 Notizen Notes Notes...