IFM AX460, Operating Instructions Manual

Page: 26 / 45

Operating instructions AX460
26
9.6 IN 2 Properties
In this menu the parameters for output 2 are defined�
CONFIGURATION
Configuration of input 2 (→ 9.3 IN 1 Properties)
START VALUE
Display value of input 2 for an input signal of 0 V, 0 mA or 4 mA (→ 9.3 IN 1 Properties)
END VALUE
Display value of input 2 for an input signal of 10 V or 20 mA (→ 9.3 IN 1 Properties)
DECIMAL POINT
Setting of the decimal point (→ 9.3 IN 1 Properties)
SCALE UNITS
Unit indicated on the display (→ 9.3 IN 1 Properties)
SAMPLING TIME (S)
Sampling interval of input 2 (→ 9.3 IN 1 Properties)
AVERAGE FILTER
Optional averaging (→ 9.3 IN 1 Properties)
OFFSET
Zero point shift / tare (→ 9.3 IN 1 Properties)
LINEARIZATION
Linearization function (→ 9.3 IN 1 Properties)
TOTALIZATION
Totalization function (→ 9.3 IN 1 Properties)
9.7 IN 2 Linearization
In this menu the linearization points for output 2 are defined�
P1(X) ... P24(X)
X coordinate of the linearization point (→ 9.4 IN 1 Linearization)
P1(Y) ... P24(Y)
Y coordinate of the linearization point (→ 9.4 IN 1 Linearization)
9.8 IN 2 Totalization
In this menu the parameters for the totalization of input 2 are defined�
TIME BASE
Time base for the totalization (→ 9.5 IN 1 Totalization)
DIVIDER
Divisor for the totalization (→ 9.5 IN 1 Totalization)