UK
Operating instructions AX460
27
DECIMAL POINT
Position of the decimal point
SCALE UNITS
Unit indicated on the display
9.9 Linkage Properties
In this menu the parameters for the linked operating mode are defined� This
menu is only displayed if an operating mode with linking (e�g� IN 1 – IN 2) has
been selected in the GENERAL MENU� For use of a linked operating mode the
parameters in the IN 1 PROPERTIES and IN 2 PROPERTIES menus have to be
set first� The result of the linking can be scaled with the following parameters�
FACTOR
This parameter defines the factor with which the result of the linking is offset�
-99999999
Lowest value
1
Default value
99999999
Highest value
DIVIDER
This parameter defines the divisor with which the result of the linking is offset�
-99999999
Lowest value
1
Default value
99999999
Highest value
ADDITIVE VALUE
This parameter defines a constant that is added to the result of the linking�
-99999999
Lowest value
0
Default value
99999999
Highest value
DECIMAL POINT
This setting defines the position of the decimal point
SCALE UNITS
