2 Installation
Place the sensor (1) on the valve
spindle (2) in a suitable fixture /
adapter (3). Fix the sensor by means
of suitable fixing screws / the lock-
ing clamp latching the toothed ring
in the fixture. Depending on the
design of actuator (4) the adapter
(3) is already integrated into the
valve top. If not, ensure a correct
connection of the adapter and the
actuator top. If necessary, adapt the
length of the valve spindle to the
measuring range.
Fixing possibilities (optional)
20
2
4
3
1
3
2
1
3
2
1
1. First insert the sensor (1) into the
adapter (2) until the limit stop.
2. Then fix the sensor using the
screws (3) as shown.
1. Fix the locking clamp (3) to the
adapter (2) as shown.
2. Carefully latch the sensor (1) until
the limit stop
by means of locking clamp
(enclosed)
by means of fixing screws
