IEMCA MASTER 880-VERSO P, Manual For Use And Maintenance

Page: 34 / 232

EN
2 - TECHNICAL INFORMATION MASTER 880/880r VERSO
2 - Pag. 18 / 34
When the selection is over, the first bar (C) is separated
from the others and unloaded on the elevator carriages
(D).
The elevator carriages (D) reach the top position; the
cycle stops.
When the bar feeder has finished the bar machining, or
when it carries out the bar pusher return strokes - if it
is the first cycle - a pulse is transmitted, making the
elevator carriages (D) lower and making bar (C) fall in
guide channels (E).
The elevator carriages (D) lower and another cycle
begins, which is over when bar (F) is in the top position.
The cycles are repeated until the bars on the magazine
(B) are finished; then, the lifting belts (A) rise to unload
other bars.
The cycle goes on until the bundle bars are finished.