IEMCA MASTER 880-VERSO P, Manual For Use And Maintenance

Page: 129 / 232

6 - USE AND OPERATION MASTER 880/880r VERSO
EN
6 - Pag. 9 / 23
MASTER 880 F
1 Emergency button for stopping the bar feeder; it
will be possible to start it again only after the
button has been manually released.
2 Selector switch for setting the magazine in the
manual or automatic mode.
position 0: the magazine is set for the manual
lowering of the lifting belts;
position 1: the magazine is preset for the
automatic function.
3 Selector switch for controlling the feeding and
the return of the bar on the selection belts.
position
→
: bar feeding;
position
←
: bar return.
4 Selector switch for controlling the elevator
carriages upstroke and downstroke.
position : elevator carriages upstroke;
position : elevator carriages downstroke;
5 Selector switch for enabling or disabling the
selection cycle in the bar magazine.
position Y: cycle enabled;
position N: cycle disabled.
6 Button for controlling the manual lowering of the
magazine belts.
press: the belts lower;
release: the belts stop.
7 Button for controlling the high/low movement of the feeler levers.
8 Button for controlling the high/low movement of the separation push rods.