IEMCA MASTER 880-VERSO P, Manual For Use And Maintenance, Page: 115 / 232

5 - ADJUSTMENTS AND SETTING-UP MASTER 880/880r VERSO
EN
5 - Pag. 29 / 33
5.5.4 Bar selection — Setup
BARS FROM 8 TO 20 MM
The bars with a smaller diameter than 20 mm do
not easily align onto the magazine rack; it is
therefore necessary to use the selection
programme in the following way:
• lift plates (A) in each upright;
• adjust the position of the bar gripping levers (B)
so that they exceed of 30 mm.
Adjust as follows:
• bring the elevator carriage at about half-stroke
by means of selector switch (C) to make the
operation easier;
• tighten or loosen screw (D);