IEMCA MASTER 880-VERSO P, Manual For Use And Maintenance

Page: 101 / 232

5 - ADJUSTMENTS AND SETTING-UP MASTER 880/880r VERSO
EN
5 - Pag. 15 / 33
WARNING — CAUTION:
the collet external diameter should be at
least 0.5 mm smaller than the bar pusher
external diameter.
• Install the collet in the bar pusher and make sure
that the rings are riveted in their special niches to
prevent accidental unscrewing of the collet and/or
relative connection.
• Assemble the first feeding pin (B) of the "new"
diameter on the flag (A).
• Insert the bar pusher into both supports.
Properly position the bar pusher in the axial
direction, so that (F) groove matches support
(G).