Transferring readings via Bluetooth
®
31
DE
EN
7
Transferring readings via Bluetooth
®
If the blood pressure monitor is configured to transfer readings via Bluetooth
®
, readings will be sent to the database
automatically.
All readings which have not yet been sent to the database will be sent together.
The blood pressure monitor will emit a short beep after transferring readings to confirm that the readings have
been transferred successfully.
Note
In the event of problems with data transfer, please see section 12 Error messages. If problems persist, please
contact your healthcare provider/physician.
Note
In the event of problems with data transfer, if there are more than 350 readings (15 readings with PWA), any
new readings will overwrite the oldest readings.
Active Pairing (Bluetooth
®
-Modem)
Note
Pairing requires some basic familiarity with Bluetooth
®
. If you are not familiar with Bluetooth
®
, please contact
your healthcare provider/physician.
The Bluetooth
®
connection is preconfigured, but in the event of certain rare faults you may need to create a
Bluetooth
®
connection manually.
To do this:
1.
Activate Bluetooth
®
on the data transfer device (Bluetooth
®
modem).
