Measuring blood pressure and pulse
30
Note
To record the pulse wave, the Tel-O-Graph
®
BT inflates the cuff to the diastolic blood pressure for approximately
10 seconds after measuring the blood pressure.
After the measurement, all the air is let out of the blood pressure cuff. The display shows your blood pressure
and your pulse rate.
4.
Remove the blood pressure cuff.
WARNING
Taking measurements too frequently can result in disruptions to blood flow!
Wait for at least 2 or 3 minutes to give your arteries time to return to their initial state.
Stopping the measurement
1.
If the measurement causes you pain, press the
button during the measurement.
The air is let out of the blood pressure cuff and the measurement is cancelled.
2.
Remove the blood pressure cuff.
